Removal and Installation
REMOVAL
1.
Remove cowl top cover. Refer to
Removal and Installation
.
2.
Disconnect front washer tube B from tube connector, and then remove tube connector.
3.
Remove washer tube B from cowl top cover.
4.
Remove fender protector RH. Refer to
Removal and Installation
.
5.
Disconnect front washer tube A from fixing clips
, and then disconnect front washer tube A from front and rear washer motor.
6.
Remove front washer tube A.
INSTALLATION
Note the following item, and then install in the reverse order of removal.
caution
Align washer tube marking to the vehicle installation position.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
..
, and then disconnect front washer tube A from front and rear washer motor.)