[Previous][Next]
Removal and Installation
cautionClean the windshield glass and front wiper refill so that the windshield glass may not be damaged by dust, etc.
 
 
REMOVAL
 
 
1. Operate front wiper to auto stop position. Refer to System Description.
2. Full open hood assembly.
3. Remove front wiper arm cap.
4. Disconnect washer tube from tube connector .
5. Remove front wiper arm mounting nut .
6. Remove front wiper arm.
 
 
INSTALLATION
Note the following items, and then install in the reverse order of removal.
caution
  • Clean front wiper arm installation location as shown in the figure, and then fully insert front wiper arm to prevent nut from being loosened by shakiness.
  • Before installation, operate front wiper to the auto stop position.
  • When installation, install so that it is within the specified position. And after installation, operate front wiper, and then check that front wiper blades stop at the specified position. Refer to Adjustment.