[Previous][Next]
Removal and Installation
 
 
REMOVAL
 
 
1. Remove front grill cover. Refer to Removal and Installation.
2. Disconnect hood lock switch harness connector (if equipped).
3. Remove hood lock mounting bolts, and then remove hood lock.
cautionNever bend hood lock release cable strongly.
4. Disconnect hood lock release cable from hood lock according to the numerical order 1→2 indicated by arrows as shown in figure.
 
 
INSTALLATION
Note the following items, and then install in the reverse order of removal.
caution
  • Check that hood lock release cable is properly engaged with hood lock.
  • After installation, perform hood fitting adjustment. Refer to Adjustment.
  • After installation, perform hood lock control inspection. Refer to Inspection.