[Previous][Next]
Removal and Installation
 
 
 
 
REMOVAL
1. Remove front bumper fascia. Refer to Removal and Installation.
2. Remove front combination light. Refer to Removal and Installation.
3. Remove radiator air guide LH and RH. Refer to Removal and Installation.
4. Remove hood lock assembly. Refer to Removal and Installation.
5. Remove crash zone sensor. Refer to Removal and Installation.
6. Remove air duct (inlet). Refer to Removal and Installation.
7. Remove air duct body mounting bolt. Refer to Exploded View.
8. Remove hood lock control cable assembly fixing clips from radiator core support.
9. Remove washer tank inlet fixing clip.
10. Remove hood support rod grommet. Refer to Removal and Installation.
11. Remove mounting bracket. Refer to Exploded View.
12. Disengage harness fixing clips from radiator core support.
13. Remove radiator core support mounting bolts, and then remove radiator core support.
 
 
Installation
Install in the reverse order of removal.