2. Remove air duct (inlet) clip and remove air duct (inlet).
3. Loosen clamp of air duct and disconnect air duct from air cleaner cover.- During installation do paint marking.
4. Disconnect the harness connector from the mass air flow sensor.
5. Separate the harness clamp for the mass air flow sensor from the air cleaner cover.
6. Remove mass air flow sensor from air cleaner body, if necessary.| caution | Handle the mass air flow sensor with care:- Do not touch the internal sensor.
|
7. Remove air cleaner assembly bolts and remove air cleaner body with air cleaner cover.
8. Release the clips 
of air cleaner cover 
and separate the air cleaner body and air cleaner cover if necessary. | : Vehicle front |
9. Remove air cleaner element if necessary.
10. Turn the steering wheel to the left.
11. Remove the fender protector (LH) front side clip. And keep a service area.
12. Remove resonator bolts and remove resonator.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
.)
)
of air duct with tab )