1. Fully open hood assembly.
2. Remove license plate bracket fixing screws, and then remove license plate bracket.
3. Remove front grille cover fixing clips 
, and then remove front grille cover. 4. Disengage front grille fixing clips and pawls from back side while pulling front grille toward vehicle front. | : Clip |
 | : Pawl |
5. Disconnect front camera harness connector. (if equipped)
6. Remove front grille.
7. Remove the following parts after removing front grille. ![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
)
)
.