[Previous][Next]
REMOVAL AND INSTALLATION
 
 
HEATER WATER PUMP ASSEMBLY
Pre-removal and post-installation operation
  • Engine room under cover front A, B (Refer to GROUP 51 - Under Cover ).
  • Draining and filling up Engine coolant replacement (Refer to GROUP 14A - On-vehicle Service ).
Removal steps
1.Heater piping hose C
Heater piping hose B (at heater side) disconnection (Refer to ).
2.Heater piping hose B
<<A>>3.Heater water pump
4.Heater water pump bracket
 
 
REMOVAL SERVICE POINT
 
 
<<A>> HEATER WATER PUMP REMOVAL
1. Release the claw to disconnect the heater water pump connector as shown.
2. Remove the three tapping screws under the heater water pump bracket to separate the heater water pump bracket from the heater water pump.
 
 
 
 
HEATER WATER VALVE ASSEMBLY
Pre-removal and post-installation operation
  • Power drive unit cover (Refer to GROUP 54Db - Power Drive Unit ).
  • Engine room under cover front A, B (Refer to GROUP 51 - Under Cover ).
  • Draining and filling up Engine coolant replacement (Refer to GROUP 14A - On-vehicle Service ).
Removal steps
1.Heater piping hose C disconnection
2.Heater water inlet pipe
3.Heater piping hose D disconnection
4.Heater water inlet pipe
5.Heater piping hose E disconnection
6.Heater piping hose D disconnection
7.Heater water valve