[Previous][Next]
REMOVAL AND INSTALLATION <FRONT>
 
 
Pre-removal and Post-installation Operation
  • Motor Coolant Draining and Refilling (Refer to ).
  • Air Cleaner Intake Duct Removal and Installation (Refer to GROUP 15 - Air cleaner ).
  • Headlight Support Upper Panel Cover and Radiator Grille Removal and Installation (Refer to GROUP 51 - Radiator Grille ).
  • Airguide Panel Upper Removal and Installation (Refer to GROUP 42A - Loose Panel ).
  • Front Bumper Assembly Removal and Installation (Refer to GROUP 51 - Front Bumper Assembly ).
  • Engine Room Under Cover Front A, B Removal and Installation (Refer to GROUP 51 - Under Cover ).
EV radiator condenser tank hose removal steps
<<A>>>>A<<1.EV radiator condenser tank hose A
<<A>>>>A<<2.EV radiator condenser tank hose B
EV radiator piping hose/EV radiator pipe removal steps
<<A>>>>A<<3.EV radiator piping hose F
<<A>>>>A<<4.EV radiator pipe E
<<A>>>>A<<5.EV radiator piping hose G
<<A>>>>A<<6.EV radiator piping hose E
Remove the hose clip from EV oil cooler hose A which is assembled into EV radiator pipe D (Refer to ).
<<A>>>>A<<7.EV radiator pipe D
<<A>>>>A<<8.EV radiator piping hose D
<<A>>>>A<<9.EV radiator pipe C
<<A>>>>A<<10.EV radiator piping hose H
<<A>>>>A<<11.EV radiator pipe F
<<A>>>>A<<12.EV radiator piping hose J
 
 
REMOVAL SERVICE POINT
 
 
<<A>> EV RADIATOR CONDENSER TANK HOSE/EV RADIATOR PIPING HOSE/EV RADIATOR PIPE REMOVAL
Make mating marks on the hose and the hose clip as shown to install them in the original position.
 

 
 
 
INSTALLATION SERVICE POINT
 
 
>>A<< EV RADIATOR PIPE/EV RADIATOR PIPING HOSE/EV RADIATOR CONDENSER TANK HOSE REMOVAL
1. Insert the hose until the protrusion of the fitting or pipe.
2. Align the mating marks on the hose and hose clip.