STEP 1. Check the wiring harness between front-view camera connector and camera-ECU connector.
STEP 2. Recheck for diagnostic trouble code.
Check again if the DTC is set in the camera-ECU.(1) Erase the DTC.
(2) Turn the ignition switch from the "LOCK" (OFF) position to the "ON" position.
(3) Check if the DTC is set.
Is the DTC set?
Go to Step 3. The trouble can be an intermittent malfunction (Refer to GROUP 00 - How to use Troubleshooting/Inspection Service Points - How to Cope with Intermittent Malfunction ).
STEP 3. Check the front-view camera.
STEP 4. Recheck for diagnostic trouble code.
Check again if the DTC is set in the camera-ECU.(1) Erase the DTC.
(2) Turn the ignition switch from the "LOCK" (OFF) position to the "ON" position.
(3) Check if the DTC is set.
Is the DTC set?
Replace the camera-ECU (Refer to ). The trouble can be an intermittent malfunction (Refer to GROUP 00 - How to use Troubleshooting/Inspection Service Points - How to Cope with Intermittent Malfunction ).