[Previous][Next]
Inspection Procedure 7: Electric steering lock does not become locked. (At power supply mode OFF)
 
 
 
 
TECHNICAL DESCRIPTION (COMMENT)
The electric steering lock performs the locking operation by using the opening/closing of the door (ON/OFF of door switch) as a trigger. If the electric steering lock is not unlocked, the door switch circuit system or the electric steering lock may have a problem.
 
 
TROUBLESHOOTING HINTS
  • Malfunction of OSS-ECU
  • Malfunction of the door switch
  • Electric steering lock malfunction
  • Damaged harness wires and connectors
 
 
DIAGNOSIS
STEP 1. Using scan tool (M.U.T.-III), read the diagnostic trouble code.
(1)
cautionTo prevent damage to scan tool (M.U.T.-III), always turn the power supply mode of the engine switch to the OFF position before connecting or disconnecting scan tool (M.U.T.-III).
Connect scan tool (M.U.T.-III). Refer to "How to connect scan tool (M.U.T.-III) ."
(2) Turn the power supply mode of the engine switch to ON.
(3) Check if the DTC is stored in the OSS-ECU.
(4) Turn the power supply mode of the engine switch to OFF.
Is the DTC stored?
Refer to diagnostic trouble code chart .
Go to Step 2.
 
STEP 2. Using scan tool (M.U.T.-III), check data list
(1)
cautionTo prevent damage to scan tool (M.U.T.-III), always turn the power supply mode of the engine switch to the OFF position before connecting or disconnecting scan tool (M.U.T.-III).
Connect scan tool (M.U.T.-III). Refer to "How to connect the Scan Tool (M.U.T.-III) ."
(2) Turn the power supply mode of the engine switch to OFF.
(3) Check the ETACS-ECU data list.
  • Open the each door.
 
Item No.Check itemNormal condition
Item 256Dr door ajar switchOpen
Item 257As door ajar switchOpen
Item 258RR door ajar switchOpen
Item 259RL door ajar switchOpen
Item No.Check itemNormal condition
Item 256Dr door ajar switchOpen
Item 257As door ajar switchOpen
Item 258RR door ajar switchOpen
Item 259RL door ajar switchOpen
OK: Normal condition is displayed.
Is the check result normal?
Go to Step 3.
Diagnose the ETACS-ECU. Refer to .
 
STEP 3.Check of the troubles
Check if the electric steering lock becomes locked when the power supply mode is OFF.
Is the check result normal?
Intermittent malfunction is suspected (Refer to GROUP 00 - How to Use Troubleshooting/Inspection Service Points - How to Cope with Intermittent Malfunction ).
Replace the electric steering lock and register the chassis number (Refer to ).