DIAGNOSTIC FUNCTION
The TCM determines that the system is defective if the TCM can receive no CAN communication information from the ECM.
DESCRIPTIONS OF MONITOR METHODS
No information is received from the ECM for 0.5 seconds.
MONITOR EXECUTION
- When 1.05 seconds have elapsed after TCM started
MONITOR EXECUTION CONDITIONS (OTHER MONITOR AND SENSOR)
Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
Sensor (The sensor below is determined to be normal)
LOGIC FLOW CHARTS (Monitor Sequence)
DTC SET CONDITIONS
Check Conditions
- Voltage of battery: 10 volts or more
- Time after TCM start: More than 1.05 seconds.
Judgment Criteria
- CAN communication with ECM: fail. (0.5 seconds)
OBD-II DRIVE CYCLE PATTERN
Ignition switch: ON (start the engine and keep it for 10 seconds or more)
PROBABLE CAUSES
- Malfunction of the CAN bus line
- Malfunction of ECM
- Malfunction of TCM