| C1394 | Incompleted learn neutral (Steering wheel sensor) |  |
| C1707 | Implausible coding data | |
| C1750 | ACC-ECU voltage out of range | |
| C1751 | ACC-ECU failure | |
| C1752 | ACC/FCM radar temperature out of range | |
| C1753 | ACC/FCM radar blockage detected | |
| C1754 | ACC/FCM radar calibration not completed | |
| C1768 | Alignment left compensation | |
| C1769 | Alignment right compensation | |
| C1770 | Reflector plate in the lowermost | |
| C1771 | Reflector plate in the uppermost | |
| C1772 | Alignment sensor too far right | |
| C1773 | Alignment sensor too far left | |
| C1774 | Alignment sensor too low | |
| C1775 | Alignment sensor too high | |
| C1776 | Received ACC failure from engine control module | |
| C1777 | Received ACC failure from ASC-ECU | |
| C1778 | Vehicle speed signal failure | |
| C1779 | Brake master pressure signal failure | |
| C1780 | A basis signal failure | |
| C1781 | SAS failure | |
| C1782 | SAS signal failure | |
| C1783 | ACC distance switch fixed ON | |
| C1784 | FCM switch fixed ON | Refer to GROUP 35C - Troubleshooting |
| C1785 | Fault detection signal failure | |
| C1786 | Received limp home from transaxle control module | |
| U0100 | Engine CAN timeout | |
| U0101 | T/M CAN timeout | |
| U0121 | ABS/ASC CAN timeout | |
| U0126 | SAS CAN timeout | |
| U0141 | ETACS CAN timeout | |
| U1195 | Coding not completed | |
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)