REMOVAL AND INSTALLATION
Post-installation Operation
Liftgate alignment (Refer to
)
Striker removal steps
•
Rear end trim (Refer to GROUP 52A, Interior Trims
)
>>B<<
1.
Striker
Liftgate lock release handle removal steps
•
Liftgate trim (Refer to GROUP 52A, Liftgate Trims
.
•
Rear wiper motor assembly (Refer to GROUP 51, Rear Wiper and Washer
)
2.
Liftgate lock release handle
Liftgate latch removal steps
•
Liftgate trim (Refer to GROUP 52A, Liftgate Trims
)
>>A<<
3.
Liftgate latch assembly
INSTALLATION SERVICE POINTS
>>A<< LIFTGATE LATCH ASSEMBLY INSTALLATION
Install the liftgate latch assembly mounting bolts in the numerical order.
>>B<< STRIKER INSTALLATION
Install the striker so that the striker center does not deviate more than ±1.5 mm (0.06 inch) from the latch center.
)![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
)
)
)
)