[Previous][Next]
TROUBLE SYMPTOM CHART
Trouble symptomInspection Procedure No.Reference page
Trouble in HUD power supply system [Communication with the scan tool (M.U.T.-IIISE) is not possible.]1
The combiner does not work, open or close normally even if combiner open/close switch is operated.2
The position of the combiner display area cannot be adjusted even if the angle adjustment switch is operated.3
The position of the combiner display area cannot be adjusted even if the angle adjustment switch is operated.4
Nothing is displayed in the combiner display area (HUD can be activated.)5
Part of information is not displayed correctly in the combiner display area (HUD can be activated.)6
Auto light control function does not work.7
Brightness decreases.8