Engine Room Under Cover Front A, B and Engine Room Side Cover (LH) Removal and Installation (Refer to GROUP 51 - Under Cover ).
Battery and Battery Tray Removal and Installation (Refer to GROUP 54A - Battery ).
Air Cleaner Assembly Removal and Installation (Refer to GROUP 15 - Air Cleaner ).
Engine Control Module Removal and Installation (Refer to GROUP 13A - Engine Control Module ).
Removal
<<A>>
>>A<<
1.
Transmission mounting bracket
REMOVAL SERVICE POINT
<<A>> TRANSMISSION MOUNTING BRACKET REMOVAL
1. Place a garage jack against the transmission case with a piece of wood in between to support the engine and transmission assembly.
2. Operate a garage jack so that the transmission weight is not applied to the transmission mounting bracket, and remove the transmission mounting bracket.
INSTALLATION SERVICE POINT
>>A<< TRANSMISSION MOUNTING BRACKET INSTALLATION
caution
Do not remove small tapping screw on the back side.
Tighten the transmission mounting bracket mounting bolts by the following procedure.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
)
)
