[Previous][Next]
REMOVAL AND INSTALLATION
noteYou do not need to perform the calibration for the battery current sensor.
Pre-removal and Post-installation Operation
Air Cleaner Intake Duct Removal and Installation (Refer to GROUP 15 - Air Cleaner ).
Removal steps
1.Battery current sensor
2.Connection of the battery harness (negative battery terminal)
3.Fusible link box cover
4.Connection of the control harness [positive battery terminal]
5.Connection of fusible link box 1P assembly
6.Connection of fusible link box 6P assembly
7.Connection of the control harness [positive battery terminal]
8.Battery terminal assembly (positive battery terminal)
9.Battery holder
10.Battery bolt
11.Battery
12.Battery cover
13.Battery tray