[Previous][Next]
REMOVAL AND INSTALLATION
cautionWhen connecting the transmission fluid cooler and the oil cooler hose, be careful not to let the transmission fluid or the like adhere.
Pre-removal operation
  • Engine Room Under Cover Front A, B and Engine Room Side Cover Removal. (GROUP 51 - Under Cover ).
  • Engine Coolant Draining (Refer to GROUP 14 - On-vehicle Service ).
  • Battery and Battery Tray Removal (Refer to GROUP 54A - Battery ).
  • Air Hose B and Air Hose C Removal (Refer to GROUP 15 - Charge air cooler ).
Post-installation operation
  • Engine Coolant Refilling (Refer to GROUP 14 - On-vehicle Service ).
  • Transmission Fluid Refilling (Refer to ).
  • Engine Room Under Cover Front A, B and Engine Room Side Cover Installation. (GROUP 51 - Under Cover ).
  • Air Hose B and Air Hose C Installation (Refer to GROUP 15 - Charge air cooler ).
  • Battery and Battery Tray Installation (Refer to GROUP 54A - Battery ).
<Vehicles without air-cooled oil cooler assembly>
Removal steps
1.Water feed hose A
2.Water feed hose B
3.Thermal valve assembly
4.Water return hose
5.Oil cooler feed hose
6.Oil cooler return hose
7.Eye bolt
8.Gasket
9.Oil cooler pipe assembly
10.Transmission fluid cooler
<Vehicles with air-cooled oil cooler assembly>
Removal steps
1.Water feed hose A
2.Water feed hose B
3.Thermal valve assembly
4.Water return hose
5.Oil cooler feed hose
6.Eye bolt
7.Gasket
8.Oil cooler pipe assembly
9.Oil cooler return hose
10.Transmission fluid cooler
11.Oil cooler feed hose
12.Eye bolt
13.Gasket
14.Oil cooler tube assembly
•Air guide upper panel (Refer to GROUP 51 - Front Bumper Assembly )
15.Oil cooler hose
16.Oil cooler tube assembly
17.Oil cooler bracket A assembly
18.Oil cooler assembly
19.Oil cooler bracket B assembly