[Previous][Next]
REMOVAL AND INSTALLATION
 
 
Post-installation operation
  • Transmission range switch and control cable adjustment check (Refer to .)
  • Selector lever operation check (Refer to .)
Removal steps
Move the selector lever to the N position.
<<A>>1.Selector lever knob
Floor console panel assembly removal (Refer to GROUP 52A - Floor Console Assembly .)
2.Shift indicator panel assembly
Floor console base, floor console base bracket removal (Refer to GROUP 52A - Floor Console Assembly .)
3.Transaxle control cable connection (selector lever side)
Connectors and harnesses connections
4.Selector lever assembly
5.Selector lever bracket
Air cleaner case removal (Refer to GROUP 15 - Air Cleaner .)
Battery and battery tray removal (Refer to GROUP 54A - Battery .)
Control unit cover, SRS-ECU removal (Refer to GROUP 52B - SRS-ECU .)
6.Transaxle control cable connection (transaxle side)
7.Transaxle control cable
 
 
REMOVAL SERVICE POINT
 
 
<<A>> SELECTOR LEVER KNOB REMOVAL
Pushing the claw in the opposite angle of boot ring, turn boot ring from side to side and pull boot downward to remove the connection between the selector lever knob and boot.