[Previous][Next]
REMOVAL AND INSTALLATION
 
 
Post-installation Operation
  • Door Inside Handle Knob Play Check (Refer to GROUP 42A, Door Inside Handle Check ).
  • Learning Procedures of Power Window Fully Closed Position (Refer to GROUP 42A, On-vehicle Service ). <Driver’s door>
Removal steps
1.Front door delta inner cover
2.Front door power window switch panel assembly
3.Front door power window switch
4.Central door locking switch <Vehicle with central door locking system>
5.Front power window switch panel
6.Front door trim assembly
7.Door inside handle
8.Front door trim
Removal steps
•Clip, Regulator handle, Escutcheon (Refer to GROUP 42A, Door Glass and Regulator Removal and Installation ) <Vehicle with manual window>
1.Rear door power window switch panel assembly
2.Rear door power window switch <Vehicle with power window>
3.Rear power window switch panel
4.Rear door trim assembly
5.Door inside handle
6.Rear door trim
•Waterproof film (Refer to GROUP 42A, Door - Window Glass Runchannel and Door Opening Weatherstrip )
7.Pad