[Previous][Next]
REMOVAL AND INSTALLATION
 
 
caution
  • Disconnect the battery (-) terminal and wait for 60 seconds or more before starting work. Insulate the disconnected (-) terminal by wrapping a tape.
  • Handle the front impact sensor with sufficient caution, and do not drop the sensor or allow contact with water, oil, or others. If a dent, crack, deformation and others are discovered, replace it with a new one.
Headlight support panel upper removal steps
•Front bumper assembly (Refer to GROUP 51 - Front Bumper Assembly and Radiator Griller .)
•Hood latch, hood lock release cable (front side) and damper (Refer to GROUP 42A - Hood .)
•Front impact sensor (Refer to GROUP 52B - Front Impact Sensor .)
1.Headlight support panel upper
•Headlight assembly (Refer to GROUP 54A - Headlight .)
2.Headlight support bracket
Air guide side panel removal
•Front bumper assembly (Refer to GROUP 51 - Front Bumper Assembly and Radiator Grille .)
3.Air guide side panel