[Previous][Next]
REMOVAL AND INSTALLATION
 
 
Post-installation operation
  • Clearance check around the hood (Refer to .)
  • Adjustment of the hood level and hood striker engagement (Refer to .)
  • Adjustment of hood height (Refer to .)
Damper removal
1.Damper
Hood latch and hood lock release cable removal steps
2.Hood latch
<<A>>3.Hood lock release handle
•Cowl side trim <driver’s side> (Refer to GROUP 52A - Interior Trim .)
•Front splash shield <driver’s side> (Refer to .)
>>A<<4.Hood lock release cable
Hood removal steps
5.Hood insulator
•Windshield washer hose and washer nozzles (Refer to GROUP 51 - Windshield Washer .)
6.Hood
7.Hood support rod
Hood hinge removal
6.Hood
8.Hood hinge
 
 
REMOVAL SERVICE POINT
 
 
<<A>> HOOD LOCK RELEASE HANDLE REMOVAL
1. Insert a flat-tipped screwdriver as shown.
2. Pull up the lever.
3. Slide the hood lock release handle out to remove.
 
 
 
 
INSTALLATION SERVICE POINT
 
 
>>A<< HOOD LOCK RELEASE CABLE INSTALLATION
Engage the hood lock release cable as shown.