Work Procedure

note	Perform the Active Blind Spot Assist [ABSA] action test after checking that the LDP system operates normally because the Active Blind Spot Assist [ABSA] shares components with the LDP system.

warning

Be careful of traffic conditions and safety around the vehicle when performing road test.

caution

Fully understand the following items well before the road test;

System description: Refer to System Description.
Handling precaution: Refer to Precautions for Active Blind Spot Assist [ABSA]Handling Precaution.

1.LDW/LDP SYSTEM ACTION TEST

Perform the LDW/LDP system action test.

2.CHECK ABSA SYSTEM SETTING

Change the power supply mode of the electric motor switch to ON (READY indicator: ON).
Check that the Active Blind Spot Assist [ABSA] setting can be enabled/disabled on the information display.
Turn the electric motor switch OFF and wait for 5 seconds or more.
Check that the previous setting is saved when the engine starts again.

: INSPECTION END