[Previous][Next]
Removal and Installation
 
 
REMOVAL
  1. Remove instrument panel assembly. Refer to Removal and Installation.
  2. Remove Head Up Display unit mounting bolts .
  3. Disconnect the Head Up Display unit harness connector.
  4. Remove Head Up Display unit .
 
 
INSTALLATION
Installation is in the reverse order of removal.
caution
  • Never damage Head Up Display unit. if damaged for Head Up Display unit., replace it.
  • If replacing Head Up Display unit, be sure to remove protective sheet from the glass surface.
  • Be sure to perform “ADDITIONAL SERVICE WHEN REPLACING HEAD UP DISPLAY UNIT” when replacing Head Up Display. For details, Refer to Work Procedure.