Work Procedure
Description
When replacing or removing the Head Up Display unit, distortion calibration of the display and adjustment of the display position are required.
Work Procedure
1.
REPLACE HEAD UP DISPLAY UNIT
Replace Head Up Display unit. Refer to
Removal and Installation
.
:
.
2.
PERFORM CALIBRATION
Perform Head Up Display calibration. Refer to Work Procedure
Diagnosis Procedure
.
:
.
3.
ADJUST DISPLAY SCREEN
Adjust display screen position. Refer to
Head Up Display
.
:
.
4.
OPERATION CHECK
Check the display of Head Up Display.
Is the displayed normal?
WORK END
Perform display adjustment again.
.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
.
WORK END
Perform display adjustment again.