M.U.T.-III SE Function (BCM

M.U.T.-III SE Function (BCM – COMMON ITEM)

APPLICATION ITEM

M.U.T.-III SE performs the following functions via CAN communication with BCM.

Diagnosis mode	Function Description
Diagnostic Trouble Code	Display DTC which BCM memorizes
Data List	Displays BCM input/output data in real time.
Special Function	Displays BCM part number Displays causes of automatic system cancellation occurred during system control Enables an operational check of a load by transmitting a driving signal from the BCM to the load

SYSTEM APPLICATION

BCM can perform the following functions for each system.

note	It can perform the diagnosis modes except the following for all sub system selection items.

×: Applicable item

System	Diagnosis mode			Reference
System	Special Function	Data List	Actuator Test	Reference
Door lock	–	×	×	M.U.T.-III SE Function (BCM - DOOR LOCK)M.U.T.-III SE Function (BCM - DOOR LOCK)
Rear window defogger	–	–	×	M.U.T.-III SE Function (BCM - REAR DEFOGGER)M.U.T.-III SE Function (BCM - REAR DEFOGGER)
Exterior light	–	×	×	M.U.T.-III SE Function (BCM - HEAD LIGHT)M.U.T.-III SE Function (BCM - HEAD LIGHT)
Interior room light	–	×	×	M.U.T.-III SE Function (BCM - INT LIGHT)M.U.T.-III SE Function (BCM - INT LAMP)
Wiper and washer	–	×	×	M.U.T.-III SE Function - WIPERScan Tool (M.U.T.-III SE) Function - WIPER
Turn signal and hazard warning lamps	–	×	×	M.U.T.-III SE Function (BCM - FLASHER)M.U.T.-III SE Function (BCM - FLASHER)
Keyless operation key	–	×	×	M.U.T.-III SE Function (BCM - INTELLIGENT KEY)M.U.T.-III SE Function (BCM - KEYLESS OPERATION KEY)
Combination switch	–	×	–	M.U.T.-III SE Function (BCM - COMB SW)M.U.T.-III SE Function (BCM - COMB SW)
Body control system	×	×	×	M.U.T.-III SE Function (BCM - BCM)M.U.T.-III SE Function (BCM - BCM)
Interior room light battery saver	–	×	–	M.U.T.-III SE Function (BCM - BATTERY SAVER)M.U.T.-III SE Function (BCM - BATTERY SAVER)
Back door	–	×	×	M.U.T.-III SE Function (BCM - TRUNK)M.U.T.-III SE Function (BCM - TRUNK)
Vehicle security	–	×	–	M.U.T.-III SE Function (BCM - THEFT ALM)M.U.T.-III SE Function (BCM - THEFT ALM)
Signal buffer	–	×	–	M.U.T.-III SE Function (BCM - SIGNAL BUFFER)M.U.T.-III SE Function (BCM - SIGNAL BUFFER)
Tire pressure monitoring	×	×	–	M.U.T.-III SE Function (BCM -AIR PRESSURE MONITOR)Scan Tool (M.U.T.-III SE) Function (BCM - AIR PRESSURE MONITOR)

FREEZE FRAME DATA (FFD)

The BCM records the following vehicle condition at the time a particular DTC is detected, and displays on M.U.T.-III SE.

M.U.T.-III SE screen item

Indication/Unit

Description

BATTERY VOLTAGE

Battery voltage of the moment a particular DTC is detected.

VEHICLE SPEED

km/h (mph)

Vehicle speed of the moment a particular DTC is detected.

EXTERNAL TEMP

°C (°F)

External temperature of the moment a particular DTC is detected

VEHICLE COND

–

note	This item is displayed, but cannot be use this item.

DOOR LOCK STATUS

–

note	This item is displayed, but cannot be use this item.

POWER SUPPLY COUNTER

min

Displays the cumulative time from the time that the battery terminal is connected.

SPECIAL FUNCTION

Function name	Item name	Description
ECU Information	–	Displays BCM part number
Actuator Test	–	Enables an operational check of a load by transmitting a driving signal from the BCM to the load