[Previous][Next]
M.U.T.-III SE Function (BCM – BCM)
 
 
DATA MONITOR
noteThe following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to M.U.T.-III SE display items.
Monitor item [UNIT]Description
Door switch AS
[ON/OFF]
Indicated [ON/OFF] condition of front door switch (passenger side)
ECO mode switch
[ON/OFF]
Indicated [ON/OFF] condition of ECO mode position in drive mode switch
Battery voltage (door lock 1)
[ON/OFF]
Indicated [ON/OFF] condition of battery power supply (front door lock actuator) status
Battery voltage (door lock 2)
[ON/OFF]
Indicated [ON/OFF] condition of battery power supply (rear door lock actuator) status
Battery voltage (ECU)Indicated of battery power supply (fuse) value
Battery voltage (flasher)
[ON/OFF]
Indicated [ON/OFF] condition of battery power supply (turn signal light) status
Battery voltage (stop light)
[ON/OFF]
Indicated [ON/OFF] condition of battery power supply (stop light) status
Battery voltage (wiper)
[ON/OFF]
Indicated [ON/OFF] condition of battery power supply (wiper) status
Seat belt switch (driver)
[ON/OFF]
Indicated [ON/OFF] condition of front seat belt buckle switch (driver side)
Sport mode switch
[ON/OFF]
Indicated [ON/OFF] condition of SPORT mode position in drive mode switch
Rear wiper auto stop switch
[ON/OFF]
Indicated [ON/OFF] condition of rear wiper auto stop status
 
 
WORK SUPPORT
Function nameItemDescription
Chassis No./VIN RegistrationRegister of the vehicle identification number when replacing BCM.
Setting change3-time flasher settingThis function is change 3-time flasher setting.
MAC KEY writingWrite MAC key to BCM.
 
 
ACTUATOR TEST
ItemOperationDescription
Front window defogger (passenger side)ON
noteThis item is displayed, but cannot be tested.
OFF
Front window defogger (driver side)ON
noteThis item is displayed, but cannot be tested.
OFF