Scan Tool (M.U.T.-III SE) Function

Scan Tool (M.U.T.-III SE) Function - WIPER

DATA LIST

note	The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to scan tool (M.U.T.-III SE) display items.

Item No.	Scan tool (M.U.T.-III SE) display [Unit]	Description
80	Battery voltage (wiper) [ON/OFF]	Indicates [ON/OFF] condition of power supply status (wiper)
89	Rear wiper auto stop switch [ON/OFF]	Displays the status of the rear wiper stop position signal received from rear wiper motor.

ACTUATOR TEST

Item No.

Test item

Operation

Description

Rear wiper

Operates the rear wiper operation.

OFF

Stops the rear wiper operation.

FR WIPER

Normal stop

note	The item is indicated, but not used.

Forced stop

note	The item is indicated, but not used.

Low (1 time)

note	The item is indicated, but not used.

High (1 time)

note	The item is indicated, but not used.

Invalid

note	The item is indicated, but not used.

Low

Operates the front wiper low operation.

High

note	The item is indicated, but not used.