Removal and Installation
Pre-removal and Post-installation Operation
Console Rear Finisher Removal and Installation (Refer to
Removal and Installation
).
Removal steps
1.
Console lid assembly
2.
Cup holder mat
•
Console finisher assembly (Refer to
Removal and Installation
).
3.
Cup holder
4.
Console box mat
Required Special Tool:
MB990784: Ornament Remover
REMOVAL SERVICE POINT
<<A>> CUP HOLDER REMOVAL
Remove the clips shown in the illustration using special tool MB990784.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
).)
)