Removal and Installation

			Removal steps
		1.	Floor console pad
		2.	Console finisher assembly
		3.	Electric parking brake switch
		4.	Switch bracket
		5.	EV mode selector switch
		6.	Drive mode selector
		7.	Console finisher

Required Special Tool:

MB990784: Ornament Remover

REMOVAL SERVICE POINTS

<<A>> FLOOR CONSOLE PAD REMOVAL

Use special tool MB990784 to disengage the clips and remove the floor console pad by pulling it in the direction shown.

<<B>> CONSOLE FINISHER ASSEMBLY REMOVAL

Remove the clips shown in the illustration using special tool MB990784.

<<C>> DRIVE MODE SELECTOR/CONSOLE FINISHER REMOVAL

caution

If the Drive mode selector is removed, the console finisher or the Drive mode selector may be damaged. Do not remove the Drive mode selector except when replacing parts.