[Previous][Next]
Removal and Installation
 
 
Removal steps
1.Console rear finisher
2.Floor console plug <Vehicle without USB adapter>
3.USB charge port <Vehicle with USB charge port>
4.120V AC socket <Vehicles with 120V AC socket>
5.120V AC socket bezel <Vehicles with 120V AC socket>
6.120V AC socket bracket <Vehicles with 120V AC socket>
7.Rear A/C control panel <Vehicles with rear A/C control panel>
8.Heater seat switch <Vehicles with heater seat switch>
Required Special Tool:
  • MB990784: Ornament Remover
 
 
REMOVAL SERVICE POINT
 
 
<<A>> CONSOLE REAR FINISHER REMOVAL
Remove the clips shown in the illustration using special tool MB990784.
 
 
 
 
INSTALLATION SERVICE POINT
 
 
>>A<< AC OUTLET INSTALLATION
Install securely as hinge to the top.