[Previous][Next]
Removal and Installation
 
 
dangerWhen servicing the high voltage system parts, always shut off the high voltage by removing the service plug (Refer to Precautions on How to Use the High-voltage Vehicle PRECAUTIONS ON HOW TO USE THE HIGH-VOLTAGE VEHICLE)
Pre-removal and Post-installation operation
Removal steps
1.Disconnect high-pressure flexible hoseA
3.O-ring
2.Disconnect low-pressure flexible hose
3.O-ring
.Front bumper (Refer to Front bumperRemoval and Installation)
4.A/C compressor bracket
5.A/C compressor cable connection
6.A/C compressor
 
 
REMOVAL SERVICE POINTS
 
 
<<A>>FLEXIBLE HOSE DISCONNECT
cautionUse the plug which is not breathable because A/C compressor oil or receiver have high hygroscopicity.
Plug the hose nipple removed to prevent the entry of dust and dirt.