[Previous][Next]
Removal and Installation
 
 
Air mix door motor (passenger's side) removal steps
.Glove box assembly (Refer to Glove box and center ventilator finisherRemoval and Installation)
1.Air mix door motor (passenger's side)
.Blower motor removal steps
.Glove box assembly (Refer to Glove box and center ventilator finisherRemoval and Installation)
.Instrument panel lower cover (Refer to Instrument panel lower coverRemoval and Installation)
2.Blower motor
.In-cabin microfilter removal steps
Glove box assembly (Refer to Glove box and center ventilator finisherRemoval and Installation)
3.In-cabin microfilter
.Mode door motor removal steps
.TCU (Refer to TCURemoval & Installation)
4.Mode door motor
.Intake door motor removal steps
.BCM (Refer to BCMRemoval and Installation)
5.Intake door motor
.Air mix door motor (rear) removal steps
.Cluster lid finisher (Refer to Floor console assemblyRemoval and Installation)
Instrument lower center cover (Refer to Instrument lower center coverRemoval and Installation)
6.Air mix door motor (rear)
.Air mix door motor (driver's side) removal steps
.Steering column cover (Refer to Cluster lid and Steering column coverRemoval and Installation)
7.Air mix door motor (driver's side)
 
 
REMOVAL SERVICE POINT
 
 
<<A>> MODE DOOR MOTOR, INTAKE DOOR MOTOR, Air MIX DOOR MOTOR REMOVAL
noteA normal plate-type ratchet driver is recommended.