Inspection

INSPECTION AFTER REMOVAL

Check the following items, and replace the part if necessary.

Check components for deformation, cracks, and other damage.
Check boots of transverse link and steering outer socket ball joint for breakage, axial end play, and swing torque.
- Transverse link: Refer to InspectionInspection.
- Steering outer socket: Refer to Inspection.

INSPECTION AFTER INSTALLATION

Check runout of disc rotor, when replaced the disc rotor. Refer to Inspection and Adjustment.
Check front wheel sensor harness for proper connection. Refer to Exploded View.
Check the wheel alignment. Refer to Inspection.
Adjust neutral position of steering angle sensor. Refer to Description.