[Previous][Next]
REMOVAL AND INSTALLATION
 
 
dangerWhen servicing the high-voltage system parts, always wear the protective equipment or armour and always shut off the high-voltage by removing the service plug (Refer to PRECAUTIONS ON HOW TO USE THE HIGH-VOLTAGE VEHICLE).
caution
  • When the wheel alignment is adjusted, always perform calibration to make ABS actuator and electric unit learn the neutral position of the steering angle sensor (Refer to Brake Control System - With ABS Actuator and Electric Unit, Adjustment of Steering Angle Sensor Neutral Position Work Procedure).
  • When replacing the front motor assembly, check the oil filter of the EV cooling system (Refer to EV Cooling System - On-vehicle Service , Oil Change OIL CHANGE). If the oil filter is contaminated with foreign material or broken, replace the oil filter together with the front motor assembly.
Pre-removal and Post-installation Operation
Removal steps
1.Front motor & generator harness
•EV oil cooler hose F, G, H connection OIL HOSE/PIPE REMOVAL AND INSTALLATION
2.Front motor
3.O-ring