1.Check wiring harness and connectors for damage.
Check the wiring harness and connectors in LIN3 line between PHEV-ECU connector and electrical parking driver unit for damage.Is the check result normal?
Repair the connector(s) or wiring harness.
2.Check of short to ground circuit and open circuit in LIN3 line between PHEV-ECU and electrical parking driver unit
Is the check result normal?
Repair the connector(s) or wiring harness.
3.Check whether the DTC is set again.
4.Check whether the DTC is set again.
Is the DTC set?
<DTC No. U1E02-87>
The procedure is complete. <DTC No. U1E07-87>
The trouble can be an intermittent malfunction (Refer to General Information - How to Use Troubleshooting/Inspection Service Points, How to Cope with Intermittent Malfunctions HOW TO COPE WITH INTERMITTENT MALFUNCTIONS).