After replace the electrical parking driver unit, perform the "Check Initial Operation" (Refer to CHECK INITIAL OPERATION).
Pre-removal and post-installation operation
Instrument side panel (LH), (RH) removal and installation (Refer to Body Interior – Instrument Panel, Removal and Installation, Floor Console Assembly Removal and Installation).
Removal steps
1.
Electrical parking driver unit connector connection
2.
Electrical parking driver unit
REMOVAL SERVICE POINT
<<A>> ELECTRICAL PARKING DRIVER UNIT REMOVAL
After removing the nuts, remove the electrical parking driver unit together with the bracket from the right side of the floor console.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
).)