REMOVAL AND INSTALLATION
caution
When removing or installing the crankshaft position sensor, be careful not to apply impact to the sensor.
Do not reuse the crankshaft position sensor that has been dropped.
Pre-removal and Post-installation Operation
Radiator Upper Hose Removal and Installation (Refer to Engine Cooling
RADIATOR REMOVAL AND INSTALLATION
)
Removal steps
•
Inlet Manifold Stay (Refer to Intake and Exhaust
INTAKE MANIFOLD REMOVAL AND INSTALLATION
)
•
Evaporative Emission Purge Solenoid (Refer to Intake and Exhaust
INTAKE MANIFOLD REMOVAL AND INSTALLATION
)
1.
Crankshaft position sensor
2.
O-ring
INSTALLATION SERVICE POINT
>>A<< CRANKSHAFT POSITION SENSOR INSTALLATION
caution
Do not apply a force such as torsion or twist to the O-ring during assembly of the sensor.
))![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
)