![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
| caution | Before replacing TCU, perform “ADDITIONAL SERVICE WHEN REPLACING TCU". For details, refer to Work Procedure |
| note | When the ignition switch is turned on after the TCU is replaced with the new one, the data will be updated by connecting to the server. Turn on the ignition switch, and wait approximately five minutes. The updating data will be completed and the TCU can communicate with the server. Talk with a call center from your information switch to check that the updating data is correctly completed, before delivering the vehicle to the user. |
Pre-removal and Post-installation Operation
|
) |
|