Diagnosis Procedure
1.
PERFORM CONFIGURATION
When B2E12–55 is detected, perform configuration of TCU. Refer to
Work Procedure
.
:
.
2.
PERFORM CONFIRMATION PROCEDURE AGAIN
With M.U.T.-III SE
Turn ignition switch ON.
Erase DTC.
Perform confirmation procedure again. Refer to DTC Description
DTCDescription
.
Is DTC B2E12–55 detected?
Replace TCU. Refer to
Removal & Installation
.
INSPECTION END
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
..
With M.U.T.-III SE.
Replace TCU. Refer to Removal & Installation.
INSPECTION END