[Previous][Next]
Removal and Installation
caution
  • When replacing the BCM, always replace it with a new one. The functions controlled by the BCM does not operate properly in case of reuse of the BCM from another vehicle.
  • Be sure to perform the following items must be performed when replacing BCM.
    • Writing vehicle specification (Refer to Description.)
    • Pairing of BCM and Keyless operation key unit
    • Register of vehicle identification number
    • Writing MAC key
    • Tire pressure sensor ID registration (if equipped)
  • When replacing BCM in relation with ECM replacement, replace ECM before writing MAC KEY. Refer to Description Description.
Pre-removal and Post-installation Operation
Instrument Lower Panel LH Removal and Installation (Refer to Removal and Installation).