[Previous][Next]
Description
When replacing ECM, the following procedure must be performed. (For details, refer to Work Procedure.)
cautionWhen replacing the ECM, always replace it with a new one. The functions controlled by the ECM does not operate properly in case of reuse of the ECM from another vehicle.
 
 
PROGRAMMING OPERATION
cautionWhen replacing the ECM, a new ECM must be used. The functions controlled by the ECM do not operate properly if a ECM from another vehicle is used.
noteAfter replacing with a blank ECM, programming is required to write ECM information. Be sure to follow the procedure to perform the programming.