[Previous][Next]
Work Procedure
1.REPLACE BCM
Replace BCM. Refer to Removal and Installation.
:
 
2.WRITING VEHICLE SPECIFICATION
Perform configuration (BCM). Refer to Description.
:
 
3.PAIRING OF BCM AND INTELLIGENT KEY UNIT
cautionWhen before pairing of BCM and Keyless operation key unit, always writing the BCM configuration. Or not doing so, BCM control function does not operate normally.
Perform the pairing of BCM and Keyless operation key unit. Press UNLOCK button of Keyless operation key.
:
 
4.REGISTER OF VEHICLE IDENTIFICATION NUMBER
With M.U.T.-III SE
  1. Select “VIN REGISTRATION” of BCM (BCM) work support item.
  2. Refer to M.U.T.-III SE and follow the on-screen instructions.
:
 
5.WRITING MAC KEY
cautionWhen replacing BCM in relation with ECM replacement, replace ECM before writing MAC KEY. Refer to DescriptionDescription.
Perform MAC key writing. Refer to Description.
:
 
6.TIRE PRESSURE SENSOR ID REGISTRATION (IF EQUIPPED)
Perform the initialization and registration of tire pressure sensor ID. Refer to Description.
: WORK END