[Previous][Next]
REMOVAL AND INSTALLATION
 
 
Post-installation Operation
Power liftgate lock and close switch assembly removal
1.Power liftgate lock and close switch assembly
Striker removal steps
Luggage rear plate (Refer to Luggage Trim REMOVAL AND INSTALLATION)
2.Striker
Power liftgate tone alarm removal steps
Liftgate lower inner finisher (Refer to Liftgate Trim REMOVAL AND INSTALLATION)
3.Power liftgate tone alarm
Liftgate lock release handle removal steps
Liftgate lower inner finisher (Refer to Liftgate Trim REMOVAL AND INSTALLATION)
4.Liftgate lock release handle
Liftgate lock removal steps
Liftgate lower inner finisher (Refer to Liftgate Trim REMOVAL AND INSTALLATION)
5.Liftgate lock assembly
Liftgate sensor removal
6.Liftgate sensor
Power liftgate control unit ECU removal steps
Luggage side upper finisher <LH> (Refer to Luggage Trim REMOVAL AND INSTALLATION)
7.Power liftgate control unit ECU
Power liftgate switch removal steps
8.Instrument lower panel LH (Refer to Instrument Panel Driver's Side Removal and Installation)
9.Power liftgate switch
 
 
INSTALLATION SERVICE POINT

 
 
>>A<< STRIKER INSTALLATION
Install the striker so that the striker center does not deviate more than ±1.5 mm (0.06 inch) from the lock center.