REMOVAL AND INSTALLATION
Pre-removal and Post-installation Operation
Console Rear Finisher (Refer to
Removal and Installation
).
Removal steps
1.
Console lid assembly
2.
Ashtray assembly
3.
Cup holder mat
•
Console finisher assembly (Refer to
Removal and Installation
).
4.
Floor console box cup holder
5.
Floor console box mat
Required Special Tool:
MB990784: Ornament Remover
REMOVAL SERVICE POINT
<<A>> FLOOR CONSOLE BOX CUP HOLDER REMOVAL
Remove the clips shown in the figure using ornament remover (Special tool: MB990784).
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
).)
)