1. Remove instrument lower panel LH. Refer to GROUP 52A - INTERIOR, INSTRUMENT PANEL DRIVERS SIDE, Removal and Installation in the Volume 1.
2. Disconnect the stop light switch harness connectors.
3. Rotate the stop light switch 
counterclockwise to remove. 4. Disconnect the accelerator pedal harness connector.
6. Remove nuts 
, and then remove bracket 
. 7. Remove snap pin and clevis pin 
from clevis of brake booster 
. 8. Remove harness clip from brake pedal.
9. Remove the brake pedal assembly.| caution | Hold the brake booster and master cylinder assembly so as not to drop out or contact them other parts. |
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
)
.)
)