[Previous][Next]
Inspection and Adjustment
 
 
INSPECTION AFTER REMOVAL
Check for the following items and replace the brake pedal assembly if necessary.
  • Check rivet for deformation, crack, and damage.
  • Check the brake pedal for bend, damage, and cracks on the welded parts.
  • Check clevis pin and plastic stopper for damage and deformation. Replace clevis pin if necessary.
 
 
ADJUSTMENT AFTER INSTALLATION
  • Adjust each item of brake pedal after installing the brake pedal assembly to the vehicle. Refer to Inspection and Adjustment.
  • Perform the release position learning of the accelerator pedal. Refer to DescriptionDescription.