1. Remove instrument lower panel LH. Refer to GROUP 52A - INTERIOR, INSTRUMENT PANEL DRIVERS SIDE, Removal and Installation in the Volume 1.
2. Disconnect the harness connector from stop light switch.
3. Loosen the stop light switch 90° counterclockwise.
4. The stop light switch penetrate the clip hole of stop light switch mounting bracket and firmly push the stop light switch against the lever . (Do not touch the pedal during installing stop light switch.) And, turn the stop light switch clockwise (about 90°) until the stop light switch.caution | - The clearance (C) between the brake pedal bracket and stop light switch mounting bracket must be the specified value.
- The stop light must be turned off when the brake pedal is released.
|