note | Do not replace A/F sensor when DTC P219A is detected. A/F sensor malfunction is not related to DTC P219A. |
caution | Perform the following steps in a well-ventilated area with no combustibles. |
note | M.U.T.-III SE must not be used to release fuel pressure. It develops again during the following steps, if released by using M.U.T.-III SE. |
Spark should be generated. |
caution |
|
note | When the gap is less than 13 mm (0.52 in), a the spark might be generated even if the coil is malfunctioning. |
Spark should be generated. |
Spark should be generated. |