[Previous][Next]
Component Function Check
1.INSPECTION START
Turn ignition switch to START.
Are any cylinders ignited?
.
 
2.CHECK FUEL INJECTOR FUNCTION
With M.U.T.-III SE
  1. Start engine.
  2. Perform “POWER BALANCE” in “ACTIVE TEST” mode with M.U.T.-III SE.
  3. Check that each circuit produces a momentary engine speed drop.
 
Without M.U.T.-III SE
  1. Start engine and let it idle.
  2. Listen to each fuel injector operating sound.
    Clicking sound should be heard.
 
Is the inspection result normal?
INSPECTION END