| Camshaft sprocket (INT) | | Camshaft sprocket (EXH) | | Timing chain |
| Timing chain tensioner | | Exhaust valve timing control solenoid valve | | O-ring |
| Exhaust valve timing intermediate lock control solenoid valve | | Electric intake valve timing control actuator | | Camshaft sprocket (INT) oil seal |
| Engine oil pressure sensor | | Crankshaft pulley | | Crankshaft pulley bolt |
| Front oil seal | | Front cover | | Filter |
| O-ring | | Tension guide (upper) | | Slack guide |
| Balancer unit sprocket | | Balancer unit timing chain tensioner | | Balancer unit timing chain |
| O-ring | | Crankshaft sprocket | | Tension guide |
| Crankshaft key | | Timing chain oil jet | | O-ring |
| Electric intake valve timing control actuator target | | Balancer unit oil seal | | Balancer unit |
| Comply with the assembly procedure when tightening. Refer to Removal and Installation | | Comply with the assembly procedure when tightening. Refer to Removal and Installation | | |
| : N·m (kg-m, ft-lb) | | | | |
| : N·m (kg-m, in-lb) | | | | |
| : Always replace after every disassembly. |
| : Should be lubricated with oil. | | | | |
| : Sealing point | | | | |